Process stage
Idea or file
Upload an STL, documentation or describe how the part will be used.
On-demand 3D printing
From file to finished part. No guesswork.
Prototypes, functional parts and short runs with guidance on technology, material and manufacturing settings.
See how a print is made ↓Process stage
Project analysis
We establish requirements, scale and the right manufacturing technology.
Process stage
Model
The design enters the workspace and receives the correct orientation.
Process stage
Geometry scan
We check surfaces, wall thickness and feasibility.
Process stage
Layers
The model becomes a precise manufacturing plan.
Process stage
Printing
The machine builds the part layer by layer.
Process stage
Inspection
The finished part is checked before dispatch.
Choose a custom project or a ready-made product.
Use cases · from prototype to short runs
Prints made for a specific job
We do not sell filament alone. We help turn a concrete need into a part that can be produced, tested and repeated.
For business
Prototypes, fixtures, housings and short pre-production runs.
A repeatable process and technical project support.See our capabilities →For makers
Models, custom elements and precise details.
We help turn an idea into a printable part.Discuss your idea →When does TacPrint help?
You do not need to know the technology to get started.
Tell us what the part needs to do. We will help with material, settings and the next practical step.
Prototyping
Check fit, shape and ergonomics before committing to a final production run.
Discuss the use case →Functional parts
Order a fixture, enclosure, tool or replacement part for a specific use case.
Discuss the use case →Short runs
Repeat small batches without the cost and lead time of a dedicated mould.
Discuss the use case →TacPrint in practice
Technology that simplifies decisions.
We match the process, material and parameters to the part's function. You get a clear path from model to inspected component.
2technologies matched to geometry
1–7typical working days
3Done process from file to inspection
Production journey
A simple process with clear decisions
One project moves through clear stages, so you always know what happens next.
See how 3D printing works→
FFF / FDMExample project
White device enclosure
An enclosure prototype with mounting holes and connector access.
- Material
- Filament techniczny
- Use case
- Prototyping
Add your model
Upload an STL and describe how the part will be used.
Choose a variant
We help select material and settings, or you confirm your own.
Receive the print
After approval, we manufacture and keep you informed.
Two technologies
Technology matched to the use case
The same project may need a completely different process. Switch technology to see the difference.
PLA · PETG · ASA · TPU
Layer by layer
Durable prototypes, mechanical parts and larger components.
RESIN · TOUGH · DETAIL
Detail cured with light
Smooth surfaces, fine geometry and precise models.
Material becomes a product
Selected work
Different technologies, materials and use cases — connected by one production standard.
How should a print be finished?→
Materials
Material follows the function of the part
We choose material based on load, temperature, flexibility, appearance and how the finished part will be used.
Visual prototypes, models and lightly loaded parts.
Explore technologies →Versatile functional parts, fixtures and enclosures.
Explore technologies →Outdoor use and parts exposed to higher temperatures.
Explore technologies →Flexible seals, bumpers and compression elements.
Explore technologies →Fine geometry, smooth surfaces and presentation details.
Explore technologies →Blog · start with the fundamentals
Knowledge before you upload
Fundamentals
How does 3D printing work?
From the model and layers to finishing and inspection of the physical part.
Understand the process →Limitations
What to know before ordering
Supports, shrinkage, surfaces and geometries that need extra attention.
Know the real limits →Checklist
How to prepare a model
Walls, scale, tolerances and information needed for an accurate quote.
Check your file →Ready-made products · TacPrint Shop
No model? Choose a finished product.
Not every purchase starts with a custom model. The TacPrint shop offers refined products with a clear purpose, documented variants and a repeatable manufacturing process.
Online storeCheck current variants, prices and fulfilment times directly in the store.Selected products · Organisation
Headphone stand
A stable home for headphones, made to order for a home or professional workspace.
- Variants
- PLA or PETG · black or white
- Fulfilment
- Made in 2–5 business days
Selected products · Accessories
Controller stand
A universal display stand that keeps a controller secure and organised at your setup.
- Variants
- PLA or PETG · two colours
- Fulfilment
- Made in 2–5 business days
Selected products · Organisation
Desk cable organiser
Five channels keep cables within reach and reduce clutter around the desk.
- Variants
- Black, white or grey
- Fulfilment
- A lightweight, ready-made functional part
Selected products · Decorations
Geometric planter
A textured cover that demonstrates the visual possibilities of layer-based manufacturing.
- Variants
- 12 or 16 cm · beige or black
- Fulfilment
- Two sizes available
Selected products · Decorations
Plant marker set
Twelve moisture-resistant PETG markers for an organised home or professional growing space.
- Variants
- White or black
- Fulfilment
- Set of 12 PETG pieces
no 3D file needed
Ready-made product
Choose an existing geometry, variant and quantity. The store confirms price and delivery.
built to your requirements
Custom project
Send a file or explain the need. We analyse geometry, material and process before quoting.
Next step
Do you have a model or just an idea?
Start a quote for a straightforward order or discuss a demanding project with us.